.:-:. Download Section

.:-:. Installation Manual and Diagrams

          Quicksolder Installation:                                    Wire Installation:                              Optional Disable/Recovery Wire:

Click HERE to download all files in a .zip archive.

.:-:. Firmware Upgrades

WIID Firmware v03

This Firmware will:

1) Add Region Free capability to your Wii
2) Fix Super Mario Galaxy error #001
3) Improve media reading support

The Upgrade Instructions are inside the .ZIP File!

PAL/JAP/USA WII: WiidUpdate_03.zip

WIID Firmware 02!

This Firmware will:

  1) add Region Free capability to your WII

  2) correct any issues with "GCOS SELFBOOT MULTIVER" v2 and v3 and audio streaming games.

The Upgrade Instructions are inside the .ZIP File!

PAL WII: WiidUpdate_02_Pal.zip

USA WII: WiidUpdate_02_Usa.zip

JAP  WII: WiidUpdate_02_Jap.zip

.:-:. WIID Instructions

Normal operation :
---------------------------

Just turn on your console as normal. Wiid operation is completely transparent and will turn on only when a backup disc is inserted.


Firmware update :
--------------------------

- Burn the firmware upgrade iso image to DVD-R/+R/-RW/+RW - Turn on the Wii console without any disc inside and go to the Disc Channel.
- Insert the firmware upgrade disc.

The disc will spin for a few seconds while the firmware is being upgraded and will finally stop.
A message on the screen will say "Unable to read the disc".
This is completely normal and signals that the firmware update operation has been completed.


Firmware recovery :
----------------------------

If for any reason you want to restore your Wiid to your default factory configuration use the following procedure.
Note : wire D needs to be soldered for the recovery procedure to be effective!

- Press and hold the RESET button on your wii.
- Turn on the Wii by pressing the power button either on the Wii console or on the Wii remote while keeping the RESET button pressed.
- Wait 15 seconds and release the RESET button.

All firmware upgrades including region settings are now removed and your Wiid has been restored to the factory configuration.


Complete disable :
---------------------------

Wiid automatically turns itself off when an original disc is inserted.
If for any reason you want to completely disable the chip use the following procedure.
Note : wire D needs to be soldered for the disable procedure to work!

- Press and hold the RESET button on your wii.
- Turn on the Wii by pressing the power button either on the Wii console or on the Wii remote while keeping the RESET button pressed.
- Wait 3 seconds and release the RESET button.

Wiid is now completely disabled.
Turn your Wii OFF and ON again to restore normal chip functionality.